||IPC Eagle Wet Vac 202 CFM/87" Lift
||IPC Eagle 30 Gallon
Polyethylene separator with adaptor
plate and tank used upstream from an
industrial vacuum to separate out and
collect debris before reaching the
||IPC Eagle Wet Vac Replacement 50'
||IPC Eagle Wet Vac Replacement Inlet
Cover with Button
Reclaim Equipment & Accessories from Alkota, Sirocco & IPC Eagle
||PEV2 Vac Reclaim System
W/ Cart, Pump-Out, 50' hose
VacuBerm and Sand Snakes
||SGV3-9ES Gas Engine Vac System
||SGV3-16 Vac System
||SGV4-16 Vac System
||SGV4 - 23 Vac System
||SGV4 - 31 Vac System
||SGV4 - 35 Vac System
||SGV5 - 35 Vac System
||WT30APO Waste Tank w/ Auto Pump
||Sirocco 2" Super Duty Vac Hose 50 Ft
||Sirocco 2" Super Duty Vac Hose 100 Ft
||SC21V Vac Surface Cleaner 21"
4000 PSI Rated
||SC12V Vac Surface Cleaner 12"
Sirocco PEV series vacuums are the most affordable, effective, multi-function systems on the market. Whether you vaccum a warehouse floor or
reclaiming water from a parking lot these 3 stage vacuums will perform the job quickly and efficiently. DOT approved waste tanks. Cam-lock
hose attachments for quick, easy set up of jobs. High capacity slide in filter stops sand and larger debris, but also traps floating oil. Optional cart
frame for potability on all terrain. With auto pump out you never have to stop working to dump your waste tank up to 15 GPM.
This industrial grade wet vac is super durable and efficient.
Constructed mostly of polyethylene , it will stand up to strong
cleaners. It has a 24 gallon capacity with an auto pump-out
feature that discharges up to 40 GPM. This unit rolls
effortlessly on 4 caster units. It is lighter than most units on
the market making it easily portable. The unit comes with:
| 50' 2 inch hose|
| floor squeegee which connects to most vacuum |
Being a two-stage vacuum, with each motor drawing 1000
watts, and the auto pump-out drawing 500 watts at 120 volts,
you should be able to connect to most outlets or generators.
Perform pressure cleaning and wash water control simultaneously. The SC-21 surface cleaner with vacuum capability controls
overspray from pressure washing sidwalks, warehouse floors, tile surfaces and more. Attach to a wet/dry vacuum and have dry
floors in minutes. Triple vacuum intake tubes remove 90-98% of dirty wash water during cleaning process.
||8-VFS-1 Vacuum Filtration System
120 Volt/13.1 Amp
5GPM System Flow Capacity
35 PSI Transfer Pump Pressure
Protecting the environment from wash water runoff and complying with governmental storm drain
regulations is simple, economical and effective with the Alkota Vacuum Filtration System (VFS). The
VFS is designed to be used as a portable or stationary treatment system that guarantees results
with ease of service while minimizing disposal cost. This automatic and easy to use zero or
controlled discharge system has been uniquely designed to keep businesses operating without
expensive filter cost, down time and additional manpower. The VFS can be equipped with a
portable wheel kit for specific sight portability or with ease fit into pick-up trucks, vans or onto
The complete process utilized in the VFS is the first of its kind and the manner in which it operates
is unique and proprietary to Alkota. The first two Phases of filtration operate and flow under a
vacuum or negative void to enhance flow and extended filter life. The wash water is vacuumed
through the pre-filtered 14” round patent pending 4-mesh multi-tier suction head or a specifically
designed surface cleaner. The waste stream then enters the Phase I filtration chamber that contains
three 100 micron screen filters and eight polymer impregnated micro-fiber filters. This process
removes most solids and 99.9% of free oil and petroleum related products. There is no time
consuming and expensive bag filters or baskets to clean.
The VFS Phase II filtration continues with the patent pending Perking® Filtration process trapping
any remaining fine solids with three 120 mesh screens that never need removing or replacing.
Finally, the effluent enters the Phase III filtration which is pressurized through high density string
wound polishing filters of 50 and 20 micron to a discharge source of choice. The polishing filters are
monitored by pressure differential gauges, making it easy to identify when filters need
cleaning or replacement.
|Multiple Phase Separation|
|17 Stages of Filtration|
|Small compact design|
|Simple to operate|
|Easy to maintain|
|Minimal operational costs|
|Minimal disposal costs|
|120 volt, low amperage|
|On demand system|
|High volume performance|
|Reduces 99% of free petroleum hydrocarbons load|
|Reduces totally suspended solids load down to 10 micron|
|Copyright © 2012-2016 North American Pressure Wash Outlet
3427 Springdale Forrest Circle
Gainesville, Georgia 30506
All Rights Reserved.
**California residents may be subject to applicable sales tax charges.