X-Jet Nozzles @ www.pressurewashoutlet.com
X-JET Long Range Nozzles
X-Jet Nozzles at North American Pressure Wash Outlet
X-Jet nozzles have become very popular in recent years.  These nozzles inject and proportion
soaps, chemicals and liquids at high or low pressure without going through your machine's
pump.  For those of you into terminology, this method of chemical injection is referred to as
"downstream injection" because the introduction of chemicals occurs AFTER the machine's
pump.  
Downstream injection, in many cases, is preferred rather than "upstream injection"
which occurs BEFORE the pump and means that any chemicals used will run through pump,
hoses and gun.  Caustic or corrosive liquids, like bleach, will eventually damage costly internal
components.

X-JETs can be used with hot or cold water pressure washers from 1000 PSI to 6000 PSI. X-Jet
nozzles come in "sizes".  The size refers to the
internal orifice of the nozzle.  Choosing the
correct size will allow for the appropriate chemical draw and the maximum shooting distance.

So besides the method of injection and the avoidance of caustics through your equipment, let's
look at some other reasons to use the X-Jet nozzle.  
The nozzle is designed to project chemicals
and other liquids to vertical heights of 30 feet or more.  
For those in the residential market,
this nozzle can truly make a difference between staying on the ground or needing a ladder or
scaffolding. Ladders are the best way for you to fall and become injured.  

Do you want to use a low-pressure wash technique for roof washing but don't want to spend
$7000 on a special soft-pressure rig?  The X-Jet nozzle, with practice, can be used to broadcast
soaps and chemicals across a roof structure with very little pressure allowing you to accomplish
the same end result with a much smaller investment.  
The X-Jet nozzles are affordable.

Some contractors, when working on residential flat work like driveways and sidewalks, will use
the X-Jet nozzle to broadcast chemicals across the surface.  We use our
SmartWash House &
Roof Wash
and the soap mixture gets a little foamy when applied with the X-Jet nozzle.  This
gives it great cling to the surface during the dwell time period.

Now that you have decided that the X-Jet nozzle could be beneficial to your business model and
equipment arsenal, which X-Jet model is for you?  Let's talk about the models and the
differences.

Please note:  You will need a 1/4 inch female quick connect to enable your X-JET nozzle.
Back to Nozzles Main Page
X-Jet Nozzles @ www.pressurewashoutlet.com
X-Jet Proportioners @ www.pressurewashoutlet.com
X-Jet M5 Nozzle @ www.pressurewashoutlet.com
The Enclosed Pail System ($39.99) is a rectangular, molded handle pail with a 4 inch
screw top.  The screw top has a brass barb installed.  Just pop the X-Jet hose onto the
barb.  There is a PVC tube that goes to the bottom of the pail and will draw all but 1/8
inch of chemical out.  Just unscrew the top, fill the pail and screw the top on again.  Now
you have a totally enclosed X-Jet system.  NO MORE SPILLS!  The X-Jet Enclosed Pail
System holds 5 gallons.
The X-Jet nozzle is available in the "Original" and the "M5" models.  The difference
between the models is the method in which the "fan spray" or "close-range" is achieved.  
The "Original" requires the user to attach (screw-in) the close-range nozzle where the
"M5" has an adjustable nozzle that the user will simply twist to achieve a "fan spray".   

When trying to decide which is the best option for you consider how you plan to use the
X-Jet nozzle. Will you be using the "fan spray" often? Will you be able to add the
close-range nozzle without assistance?  Will you or your employee remember where the
close-range nozzle is located or will it get lost in a pocket or on a job?  Replacement parts
are available however the close-range nozzle for the "Original" is not sold separately
which means
that you would need to purchase the entire kit.

Our personal choice is the "M5" for convenience sake.  We love the built-in adjustable
nozzle because truthfully it is one less thing to lose.  And replacing equipment can be
expensive so any loss or failure we can avoid is a good thing.  
NOTE:  For those with
smaller GPM/PSI pressure washers (< 2.5 GPM) consider the "Original" style as it
tends to give these smaller machines, a little extra height.

And to answer a question we hear asked a lot....YES...a longer chemical hose is an option.  
We wouldn't recommend more than 75 feet.  Once you pass that mark, the system will
most likely need some type of pump assist. And this is an excellent question and concern.
The "Original" or "M5"
Proportioners
Both models of the X-Jet nozzle will come with a pack of colored proportioners.  Do not throw these
away!
 A proportioner can be inserted into the X-Jet nozzle to meter the amount of soap and/or chemical
that is drawn up through the chemical hose . If you choose not to use a proportioner, then realize that you
will go through a larger amount of chemical.  Use the
proportioner chart to determine which color is the
best suited for your needs.  The proportioner should fit into the hose barb end of the nozzle.  This is the
part where the chemical hose is attached.  The proportioner will have a little play in it and as water
pushes up against it, the proportioner will become more seated in the nozzle and won't wiggle as much.  
This is all very normal.

And no worries because if you lose these, we do sell replacements in a multi-color pack as well as
individual color packs.
"Original"
"M5"

ITEM
NUMBER

ITEM
SIZE

ITEM DESCRIPTION

ITEM
PRICE
7700
#7
Under 3.5
GPM

#7 X-JET  ORIGINAL Nozzle
Under 3.5 GPM
$131.00
6718
#9
3.5  - 6.0
GPM

#9 X-JET ORIGINAL Nozzle
2000-3000PSI
$131.00
6046
#13
4 - 6 GPM

#13 X-JET ORIGINAL
Nozzle
3000-4000 PSI
$131.00
6719
#16
6 - 10 GPM

#16 X-JET ORIGINAL
Nozzle
4000-5000 PSI
$131.00
1489
  Package Color Coded
Proportioners
$22.99
5282
#7
#7 Replacement Orifice
$20.00
5342
#9
#9 Replacement Orifice
$20.00
3419
#13
#13 Replacement Orifice
$20.00
5348
#16
#16 Replacement Orifice
$20.00
NXCRNAS
  Close-Range Nozzle
$13.00
4401
  3/8" Plastic Ball Valve
125 PSI Maximum
NSF Listed
Viton Seals
10.99
2837
  15' Detergent Hose
Assembly Complete
$24.99
The "Original" X-Jet Nozzle & Parts
The "M5" X-Jet Nozzle & Parts
X-Jet Nozzles @ www.pressurewashoutlet.com
Enclosed Pail System
$39.99
ITEM
NUMBER
ITEM
SIZE
ITEM DESCRIPTION
ITEM PRICE
7701
#7
Under 3.5
GPM
#7 X-JET  M5 Variable Nozzle
Under 3.5 GPM
$145.00
6765
#9
2.5 - 3.5
GPM
#9 X-JET M5 Variable Nozzle
2000-3000 PSI
$145.00
6245
#13
4 - 6 GPM
#13 X-JET M5 Variable Nozzle
3000-4000 PSI
$145.00
6766
#16
6 - 10 GPM
#16 X-JET M5  Variable Nozzle
4000-5000 PSI
$145.00
1489
  Package Color Coded
Proportioners
$22.99
5282
#7
#7 Orifice for X-JET Nozzle
$20.00
5342
#9
#9 Orifice for X-JET Nozzle
$20.00
3419
#13
#13 Orifice for X-JET Nozzle
$20.00
5348
#16
#16 Orifice for X-JET Nozzle
$20.00
4401
  3/8" Plastic Ball Valve
125 PSI Maximum
NSF Listed Viton Seals
10.99
2978
  Replacement Head
$31.50
2837
  15' Detergent Hose Assembly
Complete
$31.00
The makers of the X-Jet Nozzle
have launched a new product.  
Check out the new M505 TWIST -
Adjustable Soft Wash Nozzle.

Simply twist the nozzle for 0 to 60
degree spray patterns. No more
switching tips to get different
spray patterns.

Apply detergent AND rinse up to
4 stories high when used in
conjunction with your pressure
washer's soap injector
. When
ready to rinse, simply remove
your soap injector hose from your
cleaning solution.
ITEM
NUMBER
ITEM
SIZE
ITEM PRICE
7703
2-3 GPM
$80.00
7704
3-7 GPM
$80.00
7705
7-12 GPM
$80.00
Active Search Results
Copyright © 2012-2016 North American Pressure Wash Outlet
3427 Springdale Forrest Circle
Gainesville, Georgia 30506
All Rights Reserved.
$39.99
The Enclosed Pail System ($39.99) is a
rectangular, molded handle pail with a 4
inch screw top.  The screw top has a
brass barb installed.  Just pop the X-Jet
hose onto the barb.  There is a PVC tube
that goes to the bottom of the pail and
will draw all but 1/8 inch of chemical
out.  Just unscrew the top, fill the pail
and screw the top on again.  Now you
have a totally enclosed X-Jet system.  NO
MORE SPILLS!  The X-Jet Enclosed Pail
System holds 5 gallons.